Xerox Versant 2100 Press Customer Expectation & Installation Manual Download Page 8 | Manualshive

Page: 8 / 49

Xerox Versant 2100 Press Customer Expectation & Installation Manual Download Page 8

Product Overview

Xerox

®

Versant™ 2100 Press

Customer Expectation and Installation Guide

Xerox Confidential

3

C/Z Folder

This optional unit can perform C-Fold, Z-fold,
and Z- Fold Half-Sheet (also called Engineering
Z-Fold). The C/Z Folder can be added to these
finishing devices:



Standard Finisher



Booklet Maker Finisher



Standard Finisher Plus

SquareFold

®

Trimmer Module

This optional device is available only with the

Booklet Maker Finisher (with or without the C/Z
Folder). The SquareFold Trimmer Module
flattens the spine of the booklet and trims the
face of the booklet.

2-Knife Timmer

This optional device is available only with the

SquareFold Trimmer module. Provides full-bleed
trim up to 3/16” (5mm) thickness, adjustable
trim dimensions, no DFA required.

Plockmatic 35/50

This inline booklet maker is capable of stapling,

folding, face trimming, and square folding
saddle stitched booklets of up to 50 sheets. It
also has the capability to bleed trim, rotate, and
crease each sheet.

Configuration Dependencies

The following dependencies are required for all or certain configurations:

Interface Module

The Interface Module is required with any system
configuration that has one or more finishing device,
except the Offset Catch Tray (OCT).

Configuration Dependencies

GBC
AdvancedPunch
Pro

This device requires the Interface Module and
another finishing device, such as the High Capacity
Stacker, Standard Finisher, Booklet Maker Finisher,
or Standard Finisher Plus.

SquareFold
Trimmer Module

This device requires the Interface Module and the
Booklet Maker Finisher Module is not available with
any other finishing device.

Standard Finisher
Plus

This device requires the Interface Module and a
third-party finishing device.

2-Knife Trimmer

This device requires the Interface Module, the
Booklet Maker Finisher and the SquareFold
Trimmer.

Plockmatic 35/50

This device requires the Interface Module and the
Standard Finisher Plus.

Print Server Options

Choice of one of three print servers (controllers):

Xerox

®

FreeFlow

®

Print

Server

Print server hardware comes with keyboard,

monitor, and mouse; furniture/stand is
optional

Xerox

®

EX 2100 Print

Server, Powered by
Fiery

®

Stand-alone EX Print Server hardware comes

with keyboard, monitor, mouse, stand, Color
Profiler Suite, ES2000 Spectrophotometer, and
Impose and Compose

Xerox

®

EX-P 2100 Print

Server, Powered by
Fiery

®

Stand-alone EX Print Server hardware comes
with keyboard, monitor, mouse, stand, Color
Profiler Suite, ES2000 Spectrophotometer,
Impose and Compose, and Graphic Arts
Package Premium Edition

«
...
6
7
8
9
10
...
»

Summary of Contents for Versant 2100 Press


















































Reviews:

No comments