Xerox Versant 2100 Press Customer Expectation & Installation Manual Download Page 45 | Manualshive

Page: 45 / 49

Xerox Versant 2100 Press Customer Expectation & Installation Manual Download Page 45

Installation

Xerox

®

Versant™ 2100 Press

Customer Expectation and Installation Guide

Xerox Confidential

40

Installation Site Space Requirements

1.

Is the site cleared and ready for installation?

Yes

No

If No: When will the site be cleared?

___________________________________
___________________________________

Ensure that it will be cleared and ready prior to press installation.

2.

Is proper power available?

Yes

No

If No: When is power scheduled to be installed?

___________________________________
___________________________________

Is the date prior to press installation?

Yes

No

3.

If this is a Xerox press and print server installation, is a functional
network connection installed?

Yes

No

If No: When is the network connection scheduled to be installed?

___________________________________
___________________________________

Is the date prior to press installation?

Yes

No

4.

Do the site space requirements meet installation planning
requirements?

Yes

No

If No: What steps are being taken to ensure they meet installation
planning requirements?

Is the date prior to press installation?

Yes

No

Site Preparation Checklist

The following checklist provides a list of tasks that the customer and the
Xerox/Partner personnel should complete in order to ensure a successful
installation. When both the customer and Xerox/Partner tasks are
completed, the Xerox/Partner personnel should send notification to the
carrier. This informs the carrier to plan for the delivery of the machine
and to accomplish the rigger installation.

Responsibility

(Enter the name of the

person responsible in the

area marked with the *)

Activity:
Delivery route

Customer

Xerox/

Partner

Date

Completed

Determine if the route
between the delivery

door/loading dock and
the installation site meets
all requirements for a
successful delivery;
includes: Entrance ways,
doorways, passageways,
turning radii, ramps, and
elevators

X

Activity:
Location

Customer

Xerox/

Partner

Date

Completed

Determine the location
of the press at the

installation site

X

Activity:
Electrical

Customer

Xerox/

Partner

Date

Completed

Ensure all electrical
receptacles are installed

at the site in
accordance with local
codes

X

Activity:
Location

Customer

Xerox /
Partner

Date

Completed

Order network cables
and install internet
connection

X

«
...
43
44
45
46
47
...
»

Summary of Contents for Versant 2100 Press


















































Reviews:

No comments