manualshive.com logo in svg

Xerox Versant 2100 Press, Customer Expectation & Installation Manual, Page: 13 / 49

Share
Download
Xerox Versant 2100 Press Customer Expectation & Installation Manual Download Page 13

Detailed Specifications

 

 

 

 

 

 

 

 

 

 

Xerox

®  

Versant™ 2100 Press 

 

Customer Expectation and Installation Guide   

Xerox Confidential 

 

8 

Job Description

 

Configuration or Settings

 

Print Speed Results 

 

 

Sheets 1-10: Tray 1 

 

Sheets 11-20: Tray 2 

 

Sheets 21-30: Tray 3 

23 sheets: 

 

All 8.5 x 11 in. LEF 

 

90gsm 

 

4 from tray 1, 1 from tray 3, repeat 3 times 

 

Then 1 from tray 1, 1 from tray 3, repeat 4 times 

 

Run to Standard Finisher Stacker Tray with set offset 

 

Auto Tray Switching defined in the job 

 

1-Sided 

 

100 ppm 

225 pages: 

 

8.5 x 11 in. 

 

210gsm cover 

 

90 gsm body with 13 

 

9 x 11 in. tabs 

 

15 sheets between tabs: Cover, 15 sheets, Tab, 15 
sheets, Tab, 15 sheets, Tab, 15 sheets, Cover 

 

Run to Standard Finisher Stacker Tray with set offset 

 

Auto Tray Switching defined in the job 

 

90 ppm 

 
 
Print Server / Controller 

Xerox® FreeFlow Print® Server Option 

 
 

This section provides information about the capabilities and potential 
limitations of the FreeFlow Print Server when connected to the Press.  
 
This chart is a guide to the print server's hardware specifications matched 
to the print engine. Minor hardware variations within the model may occur 
as upgrades take place in the manufacturing process. Any difference in the 
delivered product will provide functional equivalence to the performance 

and features as described herein. 
 

Surge Protection 

Xerox recommends using a surge protector with the Print Server that is 
rated at the line current. For example, in a 60 Hz FreeFlow Print Server 
installation, one 15 A surge protector is required for the monitor and Print 
Server. 
 

 

Electrical Requirements 

More detailed information, refer to 

Electrical Requirements for the Print 

Servers

. 

 

Product Recycling and Disposal 

Xerox operates a worldwide equipment take back and reuse/recycle 
program. Contact your Xerox sales representative (1-800-ASK-XEROX) to 
determine whether this Xerox product is part of the program. For more 
information about Xerox environmental programs, visit 

www.xerox.com/environment

. 

NOTE: 

This product meets the RoHS standards (Restriction of Hazardous 

Substances) required for products being installed in the European Union. 

 
Space Requirements 

Refer to 

Space Requirements/Service Space Envelope 

for space Refer to 

Space Requirements/Service Space Envelope 

for specific information that 

is required around the system in its various configurations. 

 

Include the following information when calculating the space required for 
the customer's installation: 

 

To 

enable a Xerox Service Representative to safely repair the system, the 

work area must measure at least 36 inches (91.44 cm) square around 
the server. 

 

The work surface of the print server must not infringe on the space 

requirements by the print engine and any attached accessories unless 
the work surface is a table that has wheels and can easily be moved. 

 

There must be a minimum of 78 inches (198.12 cm) clearance from the 
floor to the nearest overhead obstructions. 

 

All standard Xerox space requirements apply to this installation 
including overhead, shared, aisle or hallway, and operator space. The 
customer is responsible to provide appropriate floor spacing and 

placement surface. 

 

Storage and future availability of software that ships with the color 

server is a customer responsibility. Xerox personnel do not carry 
replacement materials. 

 

Power cords for the Print Servers are approximately 7.5 feet (2.3 meters). 

Refer to 

Module Dimensions for the FreeFlow Print Server

. 

 

Specifications 

Hardware

 

FreeFlow Print Server

 

Processors 

IntelXeon E5-2440, 2.4GHz 

Platform OS 

Solaris 10 update 10 

System Memory (Minimum)  48 GB memory 
Hard Drives (Minimum) 

4X500GB SATA 

CD Drive 

DVD R/W 

Serial Interface 

Yes 

USB 2.0 Interface 

6 USB Ports 

Monitor Size 

22 in. (558.8 mm) Flat Panel (2 USB) 

Stand 

Optional 

Removable Hard Drive 

Optional through XSIS (US only) 

Electrical 

Refer to 

Electrical Requirements for the 

Print Servers

 

BTU/Hour 

Refer to 

Environmental Requirements

 

Module Dimensions 

Refer to 

Module Dimensions for the 

FreeFlow Print Server

 

 

Running Antivirus Software 

While installing anti-virus software is not prohibited, Xerox has not tested 

anti-virus applications for the Sun/Solaris Operating System with the 
FreeFlow Print Server, their effectiveness or possible impact to productivity 
and reliability. The Solaris 10 Operating System is one of the most secure 
operating system earning the Common Criteria Certification of security 
assurance, rated at EAL 4+. Oracle/Sun is constantly evaluating security 
vulnerability research reports and releasing patches quickly to ensure 
Solaris remains secure from attackers. Of note there are few commercial 

Anti-virus products available for Solaris. 
 
The few Anti-virus software products that are available for Solaris typically 

focus on detecting Microsoft-targeted viruses that are received via email. 
The FreeFlow Print Server has disabled Email services by default. Therefore, 
software that protects against incoming mail viruses is not required. The 
server also does not send email by default, and thus is not a source of virus 
propagation. To effectively stop the spread of virus software that might 
conceivably be introduced into the print server via removable media or USB 
drives, the System Administrator may disable these points of access. 

Summary of Contents for Versant 2100 Press


















































Reviews:

No comments