7. To enable the system administrator account, for System Administrator Account, select the toggle
button.
Note:
When using SNMPv3 in FIPS mode, Message Digest Algorithm is set to SHA-1
and Message Encryption Algorithm is set to AES-128 automatically. To change these
options, first disable FIPS mode. For details, refer to
.
a. For Message Digest Algorithm, select
MD5
or
SHA-1
.
b. Type the authentication password, then retype the password.
c. For Message Encryption Algorithm, select
DES
or
AES-128
.
d. Type the encryption password, then retype the password.
8. To enable the print drivers account, for Print Drivers Account, select the toggle button.
Note:
When using SNMPv3 in FIPS mode, the Message Digest Algorithm and Message
Encryption Algorithm options are set automatically. To change these options, first
disable FIPS mode. For details, refer to
.
9. To configure trap destinations, click any available trap destination field, then configure as needed.
• For Type, click
IPv4
,
IPv6
, or
Host Name
.
• For IP Address: Port or Host Name: Port, type the IP address or host name.
• Click
User Name
, then select an option.
• For Traps to Be Received, to enable specific traps, for each trap, select the toggle button.
• Click
OK
.
10. Click
OK
.
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
63
