Xerox VersaLink C7000 User Manual Download | Manualshive

Page: 11 / 210

background image

Electrical Safety

G

Geenneerraall G

Guuiiddeelliinneess

WARNING:

• Do not push objects into slots or openings on the printer. Touching a voltage point or

shorting out a part could result in fire or electric shock.

• Do not remove the covers or guards that are fastened with screws unless you are installing

optional equipment and are instructed to do so. Power off the printer when performing
these installations. Disconnect the power cord when removing covers and guards for
installing optional equipment. Except for user-installable options, there are no parts that
you can maintain or service behind these covers.

The following are hazards to your safety:

• The power cord is damaged or frayed.

• Liquid is spilled into the printer.

• The printer is exposed to water.

• The printer emits smoke, or the surface is unusually hot.

• The printer emits unusual noise or odors.

• The printer causes a circuit breaker, fuse, or other safety device to activate.

If any of these conditions occur, do the following:

1. Power off the printer immediately.

2. Disconnect the power cord from the electrical outlet.

3. Call an authorized service representative.

PPoow

weerr C

Coorrdd

Use the power cord supplied with your printer.

• Plug the power cord directly into a properly grounded electrical outlet. Ensure that each end of the

cord is connected securely. If you do not know if an outlet is grounded, ask an electrician to check
the outlet.

WARNING:

To avoid risk of fire or electrical shock, do not use extension cords, power

strips, or power plugs for more than 90 days. When a permanent outlet receptacle

cannot be installed, use only one factory-assembled extension cord of the appropriate
gauge for each printer or multifunction printer. Always adhere to national and local
building, fire, and electrical codes regarding length of cord, conductor size, grounding,
and protection.

• Do not use a ground adapter plug to connect the printer to an electrical outlet that does not have

a ground connection terminal.

• Verify that the printer is plugged into an outlet that is providing the correct voltage and power.

Review the electrical specification of the printer with an electrician if necessary.

• Do not place the printer in an area where people can step on the power cord.

Xerox

®

VersaLink

®

C7000 Color Printer

User Guide

11

«
...
9
10
11
12
13
...
»

Summary of Contents for VersaLink C7000



















































































































































































































Reviews:

No comments

Related manuals for VersaLink C7000

Brand: EBS Pages: 34

Brand: Oki Pages: 28

Brand: Oki Pages: 22

image RUNNER 3045

Brand: Canon Pages: 14

Brand: Oki Pages: 512

Brand: ABLE Systems Pages: 4

Pro-LX Pro-LX Laminating Card...

Brand: FARGO electronics Pages: 228

IMAGE L2550DW Series

Brand: G&G Pages: 147

Digital Minilab Frontier LP5700R

Brand: FujiFilm Pages: 2

Brand: Ricoh Pages: 4

CHAMPION MSP 450

Brand: TVS electronics Pages: 92

Brand: Xerox Pages: 4

Brand: Canon Pages: 76

Brand: Xerox Pages: 4

Brand: Brother Industries Pages: 501

Brand: Panasonic Pages: 858

Brand: IBM Pages: 64

Brand: AGFA Pages: 168

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands