![background image](http://html1.mh-extra.com/html/xerox/secure-access-unified-id-system/secure-access-unified-id-system_installation-manual_4126039027.webp)
Xerox Secure Access Installation Guide
27
5
Setting Up the Secure
Access Hardware
This chapter includes:
•
Configure the Authentication Device IP Address
•
Mount the Secure Access Authentication Device
•
•
Mount/Connect the Secure Access USB Card Reader
This chapter provides instructions to perform the physical setup of the Secure Access Hardware. Prior to
setting up any Secure Access Hardware, you must have installed the Secure Access Server software.
Follow the instructions provided in Chapter 4 to complete the Secure Access Server installation.
If you are using a USB card reader for Secure Access skip to page 33
.
1. Set the IP Address for each Authentication Device.
2. Mount the Secure Access Authentication Device hardware on or near the MFP.
3. Plug in the power, serial, expansion, and card reader connections.
Summary of Contents for Secure Access Unified ID System
Page 4: ...Contents Xerox Secure Access Installation Guide 4...
Page 26: ...Installing the Secure Access Server Xerox Secure Access Installation Guide 26...
Page 34: ...Setting Up the Secure Access Hardware Xerox Secure Access Installation Guide 34...
Page 36: ...Configuration Tear Sheet Xerox Secure Access Installation Guide 36...