Setting Up the Secure Access Hardware
Xerox Secure Access Installation Guide
30
6. Change the password used to access the Web Admin tool. You can reset the password at any time,
but ensure that you change the password from the default setting before the Secure Access system
is up and running.
7. In the
Configure Xerox Secure Access Authentication Device
section, choose Static IP from the
Addressing mode
field.
8. Enter a static IP address in the
IP Address
field to set the address of this Authentication Device.
9. In the
Configure Server
section, enter the DCE Server’s IP Address in the Server IP Address field.
10. Click the
Update Configuration
button located below the Configure Server fields.
11. Click the
Restart
link at the top of the page, then click "Click here to confirm restart" to restart the
terminal.
Repeat these instructions for each Secure Access Authentication Device that you are deploying.
Note:
Remember to reconfigure the laptop Internet Properties when you are done.
Summary of Contents for Secure Access Unified ID System
Page 4: ...Contents Xerox Secure Access Installation Guide 4...
Page 26: ...Installing the Secure Access Server Xerox Secure Access Installation Guide 26...
Page 34: ...Setting Up the Secure Access Hardware Xerox Secure Access Installation Guide 34...
Page 36: ...Configuration Tear Sheet Xerox Secure Access Installation Guide 36...