![background image](http://html1.mh-extra.com/html/xerox/secure-access-unified-id-system/secure-access-unified-id-system_installation-manual_4126039028.webp)
Setting Up the Secure Access Hardware
Xerox Secure Access Installation Guide
28
Configure the Authentication Device IP Address
CAUTION:
If you are not using a DHCP server to assign IP addresses, DO NOT CONNECT THE
AUTHENTICATION DEVICE TO THE NETWORK until you have set the IP Address manually. See
Manually Assign the IP Address
Secure Access Authentication Devices are configured for DHCP communication by default. You need to
assign an IP address to each Authentication Device, and set the server IP address of the DCE
component. There are two methods to assign the IP address:
• You can use a DHCP server to assign addresses. Follow
Configure the DHCP Server to Locate the
• If you are not using a DHCP server, or if you prefer not to set option 230 on your DHCP server, you
need to use the Authentication Device Web Admin application to set the addresses manually.
Follow
Manually Assign the IP Address
Configure the DHCP Server to Locate the Authentication Devices
The instructions below are specific to a Windows DHCP server. If your DHCP server runs on a different
platform (for example UNIX, Linux, OS X server, OpenVMS, AS/400 DHCP servers), ensure that you
configure the DHCP server to pass the DCE server address in value 230.
Note:
For additional technical information on using DHCP to assign IP Addresses to the Secure
Access Authentication devices, refer to the Setting the Secure Access Authentication Device IP
Address White Paper located on
1. In Windows Administrative Tools, open the DCHP windows management console.
2. Select the DHCP server root node.
3. From the
Action
menu, select
Set Predefined Options
.
4. From the
Option Class
drop-down list, select
DHCP Standard Options
.
5. In the
Option Name
section, click
Add
.
a.
In the
Name
field, type: Xerox Secure Access
Note:
The
Name
field label is for identification purposes.
b.
From the
Datatype
drop-down list, select String.
c.
In the
Code
field, type 230.
d.
In the
Description
field, type: Secure Access
6. Click
OK
.
7. In the
String Value
section, enter EQ;A;<DCE Server IP address> in the
String
field, where <DCE
Server IP address> is the IP address of your DCE server.
8. Expand the
Scope
node and select
Scope Options
.
9. From the
Action
menu, select
Configure Options
.
10. Select
230
.
11. Click
OK
to save the changes.
Summary of Contents for Secure Access Unified ID System
Page 4: ...Contents Xerox Secure Access Installation Guide 4...
Page 26: ...Installing the Secure Access Server Xerox Secure Access Installation Guide 26...
Page 34: ...Setting Up the Secure Access Hardware Xerox Secure Access Installation Guide 34...
Page 36: ...Configuration Tear Sheet Xerox Secure Access Installation Guide 36...