Configuring SNMP
System Administrator Guide
4-22
Configuring the SNMP Access Control List
To set up a list of hosts that are authorized to access the printer using SNMP:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field.
3.
Click
Properties
.
4.
Select the
Protocol
folder on the left navigation panel.
5.
Select
SNMP
.
6.
If prompted, enter your Admin or Key User name and password.
7.
Enter up to ten host IP addresses in the
SNMP Access Control List
field. Separate entries
with a blank or a comma, specify ranges with a hyphen (-), and use an asterisk (*) to
represent a group of numbers (e.g., 13.62.156.*).
8.
Click the
Save Changes
button.
See also:
About Access Control Lists
on page 4-4
