Printing on Specialty Media
Phaser® 8560MFP/8860MFP Multifunction Printer
3-58
5.
Adjust the output tray for short or long media.
6.
On the control panel, press the
OK
button if the correct paper size and type are displayed
as the current setup, or select the appropriate paper size and type:
a.
Select
Change setup
, and then press the
OK
button.
b.
Select
New Custom Size
, and then press the
OK
button.
c.
Select one of the following options for selecting the short edge size:
■
If the size displayed is correct, press the
OK
button.
■
If the size displayed is not correct, select
Change
, press the
OK
button, press the
Up Arrow
or
Down Arrow
button to select the correct size, and then press the
OK
button.
d.
Select one of the following options for selecting the long edge size:
■
If the size displayed is correct, press the
OK
button.
■
If the size displayed is not correct, select
Change
, press the
OK
button, press the
Up Arrow
or
Down Arrow
button to select the correct size, and then press the
OK
button.
7.
Select the appropriate paper type, and then press the
OK
button.
8.
In the printer driver, select
Tray 1
as the paper source.
For media shorter than 190 mm (7.5 in.), flip up the paper
stop.
For media longer than 297 mm (11.7 in.),
extend the output tray.
8860mfp-016
8860mfp-017