Printing on Specialty Media
Phaser® 7400 Color Printer
3-37
Printing Envelopes
Envelopes can be printed from Tray 1 (MPT) only. For a list of supported envelope sizes, see
Supported Paper Sizes and Weights for Tray 1 (MPT)
on page 3-6.
Guidelines
■
Use only paper envelopes specified in the Supported Paper Sizes and Weights table.
Successful envelope printing is highly dependent on the quality and construction of the
envelopes. Use envelopes made specifically for laser printers.
■
It is recommended that you maintain constant temperatures and relative humidity.
■
Store unused envelopes in their packaging to avoid the effects of moisture and dryness
which can affect print quality and cause wrinkling. Excessive moisture can cause the
envelopes to seal before or during printing.
■
Avoid padded envelopes; purchase envelopes that lie flat on a surface.
■
Remove air bubbles from the envelopes before loading by setting a heavy book on top of
the envelopes.
■
If wrinkling or embossing problems occur, use a different brand of envelopes made
specifically for laser printers.
Caution:
Never use envelopes with windows or metal clasps; they can damage the printer.
Damage caused by using unsupported envelopes is not covered under the Xerox warranty,
service agreement, or Total Satisfaction Guarantee. The Total Satisfaction Guarantee is
available in the United States and Canada. Coverage may vary outside these areas, please
contact your local representative for details.
Print Envelopes
f
rom Tray 1 (MPT)
1.
Open Tray 1 (MPT) by pulling up and out on the handle, and then unfold the two
extensions.
7400-094
1
2
3
