Xerox Phaser 6120, Reference Manual, Page: 164 / 214

Configuring the Printer
153
Auto-Sense Default When Auto is selected as the Default Emulation
(see above), the printer samples the incoming print
job to try to determine the correct emulation to use
for the job. If the printer is unable to discern the
emulation of an incoming print job, the setting for
this parameter is used as the emulation.
Choices: PCL5, PostScript
Default: PCL5
Configuration Menu Equivalent:
MENU SYSTEM DEFAULT/
EMULATIONS/AUTO DEFAULT
Save Changes Saves and applies any changes made.
Discard Changes If you made changes to any of the parameter
settings but do not wish to apply the changes,
selecting this button restores the last submitted
parameter settings.
Set as Default button Saves the changes made to Custom values.
Restore Default button Restores the Custom values to the ones saved in
custom defaults.
Restore Factory button Changes all settings to the Factory values.
Item Description