Xerox Phaser 6120, Reference Manual, Page: 118 / 214

Specifying Printer Driver Settings
107
Printer Driver Settings
Basic Features
Parameters Settings
Auto Tray Switching Specifies tray switching behavior as Enabled
or Disabled .
„ The default setting is Disabled .
Collate If Yes is selected, all pages in the documents
are printed as sets of printouts.
„ The default setting is Yes .
Color Mode Specifies color mode as Color or Grayscale .
„ The default setting is Color .
Duplex Options Specifies the duplex print binding position as
Long Edge , Simplex , or Short Edge .
„ The default setting is Simplex .
Paper Source Specifies the paper source as Tray 1 , Tray 2 ,
or Auto .
„
The default setting is Tray 1 .
Paper Type Specifies the paper type as Printer Default ,
Plain Paper , Thick , Transparency ,
Letterhead , Label , Postcard , Envelope , or
Glossy .
„ The default setting is Plain Paper .
Resolution Specifies the resolution of the image as
2400dpi (Enhanced) , 600dpi (Standard) .
„ The default setting is 2400dpi
(Enhanced) .