![background image](http://html1.mh-extra.com/html/xerox/phaser-4620/phaser-4620_service-manual_4208243358.webp)
5/2011
6-32
Phaser 4600/4620 Printer Service Manual
dC330
Revision - Xerox Internal Use Only
General Procedures/Information
Table 10 Output Codes 06
Code
Display Name
Description
General
06-100
LSU Motor Run
Laser Unit scan motor
On/Off
06-200
LSU LD power
Laser diode half power
On/Off
06-300
LSU Fan Run
Right Chassis Fan
On/Off
Table 11 Output Codes 08
Code
Display Name
Description
General
08-810
T1 Pick-up Clutch
Tray 1 Feed Clutch
On/Off
08-820
T2 Pick-up Clutch
Tray 2 Feed Clutch
On/Off
08-830
T3 Pick-up Clutch
Tray 3 Feed Clutch
On/Off
08-840
T4 Pick-up Clutch
Tray 4 Feed Clutch
On/Off
08-850
Registration Clutch
Registration Clutch
On/Off
08-855
T5 Pick-up Clutch
Tray 5 Feed Clutch
On/Off
08-856
T6 Pick-up Clutch
Tray 6 Feed Clutch
On/Off
08-920
T2 Feed Motor Run
Tray 2 Feed Drive Motor
On/Off
08-930
T3 Feed Motor Run
Tray 3 Feed Drive Motor
On/Off
08-940
T4 Feed Motor Run
Tray 4 Feed Drive Motor
On/Off
08-950
T5 Feed Motor Run
Tray 5 Feed Drive Motor
On/Off
08-960
T6 Feed Motor Run
Tray 6 Feed Drive Motor
On/Off
Table 12 Output Codes 09
Code
Display Name
Description
General
09-100
MHV Bias
MHV bias voltage on at nor-
mal drive level.
On/Off
09-200
Dev Bias
Developer bias voltage on at
normal drive level.
On/Off
09-300
THV Bias
THV plus bias voltage on at
normal drive level.
On/Off
09-400
THV Bias
THV negative bias voltage on
at normal drive level.
On/Off
09-500
SMPS Fan Run
Run SMPS Fan
On/Off
09-600
Toner dispense motor
Run the toner dispense motor
in the Main Drive Assembly
On/Off
09-950
Erase lamp
Toggle the Erase lamp
On/Off
Table 13 Output Codes 10
Code
Display Name
Description
General
10-100
Fuser Power On Main
Raises Fuser temperature to
180 degree setpoint.
On/Off
10-110
Fuser Power On Side
Raises Fuser temperature to
180 degree setpoint.
On/Off
10-400
Fuser Motor Forward
Run Fuser Drive Assembly.
On/Off
10-500
Rear Fan Run
Run Rear Door Fan.
On/Off
10-600
Fuser Bias
Fuser bias voltage on at nor-
mal drive level.
On/Off
10-900
Fuser Gap Motor
Run the Fuser Release Drive
Assembly
On/Off
Table 14 Output Codes 12
Code
Display Name
Description
General
12-100
Entrance Motor
Run Finisher entrance motor
for about 5 sec.
On/Off
12-110
Exit Motor
Run Finisher Transport Motor
for about 5 sec.
On/Off
12-120
Feed Motor
Run Mailbox Transport Motor
for about 5 sec.
On/Off
12-300
Front Jog Home
Move right tamper to home
position
On
12-310
Front Jog Stand
Move right tamper to stand
position
On
12-320
Rear Jog Home
Move left tamper to home
position
On
12-330
Rear Jog Stand
Move left tamper to stand
position
On
12-400
Support Finger Home
Move supporter to home posi-
tion
On
12-410
Support Finger Stand
Move supporter to stand posi-
tion
On
12-600
Stacker Down
Lower Stacker Tray
On
12-610
Stacker Up
Raise Stacker Tray
On
12-700
Stapler
Staple when no cartridge
On
12-885
Diverter Motor
Run entrance motor to actu-
ate exit gate
On/Off
12-935
Upper Diverter Motor
Cycle upper diverter between
three positions
On/Off
12-955
Lower Diverter Motor
Cycle lower diverter between
three positions
On/Off
Table 13 Output Codes 10
Code
Display Name
Description
General