Xerox Phaser 4600DN, User Manual

Page: 116 / 150

General Care and Troubleshooting
Xerox Phaser 4600/4620
User Guide 116
Toner particles are
around bold
characters or
pictures For toner adherence issues:
•
Change the printer option and try again.
Go to the
Printing Preferences , click the Paper tab, and set the paper type to
Recycled .
The top half of the
paper is printed
lighter than the
rest of the
paper For toner adherence issues:
• Change the printer option and try again.
Go to the
Printing Preferences , click the Paper tab, and set the paper type to
Recycled .
Repetitive Defects If marks or voids repeatedly appear on the page use the following guidelines to
determine the customer replaceable unit which needs replacing:
• Repeated every 38 mm (1.5 in.), replace the Toner Cartridge.
• Repeated every 52 mm (2.0 in.), replace Toner Cartridge.
• Repeated every 94.4 mm (3.72 in.), replace the Toner Cartridge.
• Repeated every 51 mm (2.0 in.), replace the transfer roller (contained in the
maintenance kit).
• Repeated every 94.2mm (3.7 in.), replace the fuser (contained in the maintenance
kit).
Page Skew • Ensure that the paper is loaded properly.
• Check the paper type and quality. (See Media Specifications on page 62.)
• Ensure that the guides are not too tight or too loose against the paper stack. (See
Loading Paper on page 56.)
Condition Suggested Solutions
T
A a B b C
A a B b C
A a B b C
A a B b C c
A a B b C c