Printer Settings
Phaser® 4510 Laser Printer
4-14
Selecting the Default for Offsetting Output
When you send output to the output tray or the stacker tray, the copies or jobs can be offset in
the tray. Offsetting shifts the pages in the output tray for each job or each copy of a collated
job.
Note:
The offsetting of jobs works only if
Offset Collated Sets
is set to
Disabled
in the print
driver.
Offset Collated Sets
is located on
the
Advanced
tab of the driver.
To select the default setting for offsetting output, use one of the following options:
■
The printer’s control panel
■
CentreWare IS
Using the Control Panel
To select the default setting for offsetting output on the control panel:
1.
Select
Printer Setup
, and then press the
OK
button.
2.
Select
Paper Handling Setup
, and then press the
OK
button.
3.
Scroll to
Job Offset
, press the
OK
button to select either
On
or
Off
.
Using CentreWare IS
To select the default setting for offsetting output using CentreWare IS:
1.
Launch your web browser.
2.
Enter the printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select
General
on the left navigation panel, and then select
Printer Defaults
.
5.
In the
Job Offset
drop-down list, select
None
,
End of Job
, or
End of Set
.
6.
Click the
Save Changes
button at the bottom of the page.
