Printer Settings
Phaser® 4510 Laser Printer
4-13
Setting the Default Paper Destination
The printer has one output tray located on the top of the printer. If the 500-sheet stacker is
installed, the following output options are available:
■
Standard Output Tray
■
Stacker
To select the default Paper Destination setting, use one of the following options:
■
The printer’s control panel
■
CentreWare IS
Using the Control Panel
To select the default Paper Destination in the control panel:
1.
Select
Printer Setup
, and then press the
OK
button.
2.
Select
Paper Handling Setup
, and then press the
OK
button.
3.
Select
Paper Destination
, and then press the
OK
button.
4.
Select the appropriate tray, and then press the
OK
button.
Using CentreWare IS
To select the default Paper Destination using CentreWare IS:
1.
Launch your web browser.
2.
Enter the printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select
General
on the left navigation panel, and then select
Printer Defaults
.
5.
Select the appropriate tray in the
Paper Destination
drop-down list.
6.
Click
Save Changes
at the bottom of the page.
