Printer Settings
Phaser® 4510 Laser Printer
4-11
5.
In either the
Tray 1 Mode
or
Tray 2-N
drop-down list, select the appropriate setting.
6.
Click the
Save Changes
button at the bottom of the page.
Setting the Duration of the Tray 1 Prompt or the Tray 2-N Prompt
The tray prompt settings specify the amount of time the prompt displays on the control panel
after paper is loaded in the trays. The tray prompt requests the user to confirm the current tray
setup or to specify the correct paper type and size.
To select a Tray 1 or Tray 2-N prompt setting, use one of the following options:
■
The printer’s control panel
■
CentreWare IS
Using the Control Panel
To select the tray prompt setting on the control panel:
1.
Select
Paper Tray Setup
, and then press the
OK
button.
2.
Select either
Tray 1 Prompt
or
Tray 2-N Prompt
, and then press the
OK
button.
3.
Select the appropriate duration, and then press the
OK
button.
Using CentreWare IS
To select the tray prompt setting using CentreWare IS:
1.
Launch your web browser.
2.
Enter the printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select the
General
folder on the left navigation panel, and then select
Printer Defaults
.
5.
In either the
Tray 1 Prompt
or
Tray 2-N Prompt
drop-down list, select the appropriate
setting.
6.
Click the
Save Changes
button at the bottom of the page.
Duration
Behavior
None
Turns the tray setup prompt off.
Factory default for Trays 2-4.
30 Seconds
Displays the tray setup prompt for 30 seconds after paper is
loaded in the tray.
Factory default for Tray 1.
Infinite
Displays the tray setup prompt after paper is loaded in the tray
until a control panel selection is made. The printer will not print
until a selection is made.
