Xerox Phaser 3121 Manual Download Page 51

Page: 51 / 136

SING

RINT

ATERIALS

Adjust the guide to fit the width of the transparencies.

When you print on transparencies, you must select

Manual

Feed

for

Source

from the software application, and then

select the correct paper size and type. For details, see
page 4.6.

Note:

Please be careful when you open the rear cover. The inside

of the printer maybe hot.

Press the

button to start feeding.

Printing is started. Close the rear output tray after the
printing is completed.

Notes:

• To prevent transparencies from sticking to each other, do not let

the printed sheets stack up as they are printed out.

• Place transparencies on a flat surface after removing them from

the printer.

Summary of Contents for Phaser 3121









































































































































Search results

Summary of Contents for Phaser 3121

Reviews:

Related manuals for Phaser 3121

Brands by name

Popular brands

Xerox Phaser 3121, Manual

Search results

Summary of Contents for Phaser 3121

Reviews:

Related manuals for Phaser 3121

Brands by name

Popular brands