Quick Network Install Guide
13
20.
The Wizard will return you to the previous dialog. Verify that the
path and filename are correct, and click
OK
.
21.
At the next dialog, enter a name for the printer and select whether
you want that printer to be the default, then click
Next>
.
22.
If the printer will not be shared, click
Next>
. To share the printer,
enter a
Share Name
, check the share checkbox, then click
Next>
.
23.
At the next dialog, it is recommended that you print a Test Print.
Click
Next>
.
24.
The
Completing the Add Printer Wizard
window will come up. If
all the data presented is correct, click the
Finish
button. If not,
click the
<Back
button to correct any errors.
25.
Wait for the Test Print to print. A new dialog will ask for
confirmation of the Test Print; click
Yes
.
26.
Send a print job to the printer.
27.
Check the print job for print-quality. If print-quality problems
exist, use the print-quality section of your printer’s
Advanced
Features and Troubleshooting Manual
to correct the problem.
28.
If your print job did not print, see the Troubleshooting section for
your operating system in the
Advanced Features and
Troubleshooting Manual
to correct the problem.
Note
Printers connected to a Windows 2000 network with TCP/IP
protocol enabled can use a web browser to monitor and
configure your printer. Refer to the section in this document
entitled
Internet Printer Services
.
Note
For installing or managing multiple printers on a Windows
2000 network with TCP/IP protocol enabled, you can use the
Xerox CentreWare MC snap-in to Microsoft Management
Console. Refer to the
Xerox CentreWare MC User Guide
.
