Xerox Nuvera EA User Manual And Training Aid Download Page 53

Page: 53 / 256

Using the Basic Finishing Module (BFM)

file:///C|/Documents%20and%20Settings/Miz%20B/My%...uvera%209.0%20UGTA_FINAL/English/hdi_f_BFM_00.htm (3 of 3)8/13/2008 2:17:03 PM

Related Hints and Tips

Tab behaviors for non-MFF systems only

On non-MFF systems, tab jobs are delivered to the finisher face down in 1 to N order. As such, the following must be noted:

Explore the links below to learn all of the ways to utilize the BFM.

5. Close the Elevator Tray.

●

Tabs must be loaded in the feeder tray in 1 to N order (commonly referred to as forward-ordered tabs)

●

There are no special loading instructions required for drilled or pre-printed stock. Load those stocks according to the labels on

the feeder trays.

Delivering Document Sets to a Stacker

Using Offset to Organize Documents in a Stack

Replacing Staple Cartridges

Clearing Staple Jams

Clearing Paper Jams

Unloading the Stacker

NOTE

: If the labels indicate that drilled paper is to be loaded with the holes along the trailing edge (to the right), then

the incorrect labels are installed on the feeder module. Contact service for a replacement.

53 of 256

Summary of Contents for Nuvera EA

































































































































































































































































Search results

Summary of Contents for Nuvera EA

Reviews:

Related manuals for Nuvera EA

Brands by name

Popular brands

Xerox Nuvera EA, User Manual And Training Aid

Search results

Summary of Contents for Nuvera EA

Reviews:

Related manuals for Nuvera EA

Brands by name

Popular brands