manualshive.com logo in svg

Xerox Nuvera EA, User Manual And Training Aid, Page: 148 / 256

Share
Download
Xerox Nuvera EA User Manual And Training Aid Download Page 148

Changing DFA Configurations for 3rd Party Finishers

file:///C|/Documents%20and%20Settings/Miz%20B/My%...uvera%209.0%20UGTA_FINAL/English/hdi_f_DFA_00.htm (2 of 2)8/13/2008 2:16:59 PM

DFA sheet rotation and letter-size banner sheets

If a Queue specifies DFA sheet rotation and letter size banner sheets, jobs sent to the DFA Rotate Queue will fault with the FreeFlow 

Print Server Required Media Not Loaded message when both Long Edge Fee (LEF) and Short Edge Feed (SEF) letter source media 

are available for paper feeding. 

When the DS5000 is set to be a stacker, banner sheets are delivered to the main stacker. With sheet rotation, letter media must be fed 

SEF to satisfy the DS5000 minimum input cross-process dimension of 10 inches. When tested, the system attempted to select LEF 

letter media for the banner sheet; when rotated, the cross-process dimension is 8.5 inches.

 

  

If Device Type is set to 

Stacker

, the resultant behavior is:

If Device Type is set to 

Finisher

, the resultant behavior is: 

Pause

 - immediate 

Banner sheet delivery

 - to the same destination as the job body 

Pause

 - next set boundary 

Banner sheet delivery

 - to the FTM top tray

NOTE

: Disabling the LEF letter paper tray allows the job to print, or disabling Banner Pages allows the job to finish even if both 

trays are enabled. When the DS5000 is set to be a finisher, banner sheets are delivered to the top tray and LEF letter for the 

banner sheet top tray delivery does not cause a fault. 

148 of 256

Summary of Contents for Nuvera EA

































































































































































































































































Reviews:

No comments