manualshive.com logo in svg

Xerox LightScribe, User Manual

Share
Download
Xerox LightScribe User Manual Download Page 55

Xerox LS Duplicator     55

Chapter 4:
Menu Overview 

  1

 

 Copy 

 

This menu will guide you to make CD/
DVD copies . For more information, please 
refer to “Make Disc-to-Disc Copies” on 
page 20 or “Make Hard Drive-to-Disc 
Copies (ONLY for duplicators that have a 
hard drive installed) on page 26 .

  2

 

 Print 

 

This menu will guide you to design and 
print a label from your LightScribe 
Standalone Duplication duplicator . 

  3

 

 Copy + Print 

 

This function allows the user to perform 
the disc duplication operation then the 
disc labeling operation as part of one 
process .  The user merely needs to flip 
the disc from the data side to the label 
side after each duplication pass . 
 
To use this function, the master disc 
partition/image and LightScribe 
Duplication Label file ( .lsi file) are 
required to be preloaded onto the 
duplicator’s internal hard drive . For more 
information, please refer to “Load 
Partition” under “Hard Drive Setup” on 
page 27, and “Load Label” under “Print 
Setup” on page 4 .

Summary of Contents for LightScribe






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands