22 Xerox LS Duplicator
Section 2: Making Copies from
the Reader (when the Reader is
selected as the source drive).
Step 1:
Use the up or down arrow button to
navigate to the Copy menu:
Step 2:
Press the >> button to enter the
Copy menu . You should then see the Coun-
ter feature screen .
The Counter feature will let you choose how
many copies you want to make for your
project . It allows the duplicator to count the
number of copies you’ve made for this job
and prompt you when the desired number
has been achieved .
You can choose not to input your desired
number of copies if you prefer to copy con-
tinuously with no interruption . (It will still
count the number of copies you’ve made
for this job, but it will not notify you when
to stop .) To do so, simply press >>button
when you see the “No Counter” on the 2nd
line of the screen below:
Or, you can choose to enter the desired
number of copies for this job by following
the simple procedure below:
a
Simply press the up or down button to
the following screen:
Duplicator 2.20
1. Copy
Counter:
No Counter
Counter:
No Counter
Counter:
Specify Counter
The Counter feature is for your
convenience only, and will
allow you to make more copies
than the amount desired, if so
required.
Note
