Page
20
Xerox 4127/4112 PDL Reference Guide
Feature
Implementation
Values
@PJL SET JOBATTR
= ”@PNHN =
value2
”
NONE
Where
value2
is one of the following:
TWO: 2 holes
Folding
@PJL SET JOBATTR =
"@FOLD =
value1
"
Where
value1
is one of the following:
BIFOLDINSIDE: Bi-Fold Single Sheets
(Print Inside)
BIFOLDMULTIOUTSIDE: Bi-Fold Multiple
Sheets
Booklet
@PJL SET JOBATTR =
“@BKLT =
value1
”
@PJL SET JOBATTR =
“@BKSG =
value2
”
@PJL SET JOBATTR =
“@BKDN =
int1
”
Where
value1
is one of the following:
NONEDIVIDE: Compile a booklet as long
as the number of sheet does not exceed the
limit
MANUALDIVIDE: Divide sheets based on
the specified limit manually(The number of
sheets is specified with “@BKDN”).
OFF: Do not compile a booklet
Where
value2
is one of the following:
RIGHT = Right / Bottom Bind
LEFT = Left / Top Bind
Where
int1
is:
1~9999 = Booklet dividing number for each
set
Quantity
@PJL SET QTY =
int
Where
int
is:
1-999
(If you use this parameter, it also indicate
use collate mode automatically.)
Resolution
@PJL SET RESOLUTION =
value
Where
value
is one of the following:
600
Bits Per Pixel
@PJL SET BITSPERPIXEL
=
value
Where
value
is one of the following:
1:
1 bit per pixel (per plane)
Copies
@PJL SET COPIES =
int
Where
int
is:
1-999
(This parameter used for uncollated mode.)
<ESC>&l
int
X
Where
int
is:
1-999
Simplex
@PJL SET DUPLEX =
value1
Where
value1
is one of the following:
OFF: simplex
<ESC>&l
int
S
Where
int
is one of the following:
0: simplex
