Xerox Legacy 4112, Pdl Reference Manual

Page: 22 / 28

Page 22 Xerox 4127/4112 PDL Reference Guide
Feature Implementation Values
“@DAID = string3 ”
allowedOnly
) as password without encryption.
It can be null (zero length string)
Where string3 is a maximum of 32 character
(
ASCII characters in the range 20h - 7Eh are
allowedOnly
) as account ID. It can be null
(zero length string)
Note:Auditron and JBA cannot be used at the
same time. So the same command works for
both modes.
Auditron @PJL SET JOBATTR =
“@JOAU = string1 ”
@PJL SET JOBATTR =
“@JOAP = string2 ”
@PJL SET JOBATTR =
“@DAID = string3 ”
Where string1 is a maximum of 32 character
(
ASCII characters in the range 20h - 7Eh are
allowedOnly
) as job owner (Capital character & small
character is distinguished)
Where string2 is a maximum of 12 character
(
ASCII characters in the range 20h - 7Eh are
allowedOnly
) as password without encryption.
It can be null (zero length string)
Where string3 is a maximum of 32 character
(
ASCII characters in the range 20h - 7Eh are
allowedOnly
) as account ID. It can be null
(zero length string)
Note:Auditron and JBA cannot be used at the
same time. So the same command works for
both modes.
Delay Print @PJL SET JOBATTR =
“@PRTM =
YYYY:MM:DD:hh:mm ”
YYYY:MM:DD:hh:mm
YYYY : year(AD 2000
～
2099)
MM : month (1
～
12)
DD : day (1
～
31)
hh : hour(0
～
23)
mm : minute(0
～
59)
Banner Sheet @PJL SET JOBATTR=
“@BANR= value ”
@PJL SET JOBATTR=
“@BCMT= comment string ”
Where value is one of the following:
START: start sheet
DEVICE: depend on device setting
OFF: no banner sheet
Where string is a maximum of 255 character
(
ASCII characters in the range 20h - 7Eh are
allowedOnly
) as comment for banner.