background image

S

ETTING

 

UP

 

THE

 F

IERY 

EXP4110 

FROM

 

THE 

C

ONTROL

 P

ANEL

23

Fiery EXP4110 Control Panel 

Use the Fiery EXP4110 Control Panel to view status information, print system pages, 
and set up printing. While most elements in the Control Panel have counterparts in 
Command WorkStation, you can view current functions on the Control Panel even 
when Command WorkStation is not connected to the Fiery EXP4110 or is not running. 

Safety warnings

The Fiery EXP4110 display window is a liquid crystal display (LCD) made of glass, and it 
can break. Do not subject it to strong shocks.

If the display window breaks and the liquid crystal material leaks out, do not inhale, ingest, 
or touch it. If the material gets on your skin or clothing, wash it off with soap and water 
immediately.

Do not touch or put pressure on the display window. This will change the color of 
the window.

Activity light

The activity light indicates the current Fiery EXP4110 activity. If the light is:

1

Up button

2

Menu button

3

Down button

4

Activity light

5

Line selection buttons

6

Display window

1

2

3

4

5

6

Solid red

An error has occurred, causing the Fiery EXP4110 to be 
disabled.

Flashing red

An error has occurred, causing printing to be disabled, but the 
Fiery EXP4110 is capable of processing.

Solid green

The Fiery EXP4110 is idle.

Flashing green

The Fiery EXP4110 is processing or printing a job, or 
communicating with a remote computer.

No light

The Fiery EXP4110 is off or starting up.

Summary of Contents for Fiery EXP4110













































































































Reviews: