ADMINISTERING THE FAX SOFTWARE
4. Select Exit and press Enter.
Editing printer port redirection
Usually fax software captures data from, and sends data to, the
same port. This is the port you specified as the printer port
when you ran the install program. If needed, you can change
this setting, so that the fax software captures data from a
different port than the printer port.
Follow these steps to edit printer port redirection:
1. Choose Edit Printer Port Redirection from the Advanced
Installation Options screen.
The Printer Port Redirection screen appears.
2. Select the port you want and press Enter.
N
Note: If you edit Printer Port Redirection, you must
make sure that all the MS-DOS software you want to fax
from is set to output to the new capture port you select.
Editing the fax printer password
The fax password allows others with fax printers to send
documents to your printer in PostScript format. The fax printer
password can be up to 44 characters long.
Follow these steps to change your fax printer password:
1. Select Edit Fax Printer Password from the Advanced
Installation Options screen.
3-8
XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE
