3.
Administering the fax software
You can change the fax software settings to suit your working
environment and needs. This chapter explains the following:
•
Run the install program from your hard disk to change your
fax software basic settings
•
Use INSTALL/A to change fax printer settings and advanced
fax software settings
•
Use INSTALL/U to:
— Install the fax software in AUTOEXEC.BAT file or
windows
— Expunge the fax software
•
Use the Fax Manager program to:
— Display and control the Fax Queue
— Print a Fax Activity Log
— Import or export Phonebook data.
Changing the fax software basic settings
Change any of the settings specified during the initial installation
by running the install program from your hard disk (and not from
the original floppy disk).
The settings that can be changed are as follows:
•
Printer port selection
•
“From” information such as the Sender name, Company
name, and Fax number.
•
Telephone settings, including specifying tone or pulse dialing
and outside access codes
•
Enabling or disabling the Fax Pop-up menu
•
Hot-key combination used to display the Fax Pop-up menu
•
Displaying or printing the README file
•
Windows installation or expunging Windows (see the
following note)
•
Automatic loading (see the following note).
N
Note: It is quicker to change Windows installation and
automatic loading with the INSTALL/U program. Please
refer to the section, “Changing automatic loading and
Windows installation with INSTALL/U” later in this
chapter.
XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE
3-1
