Xerox Docutech 6100, Operator'S Manual

Page: 132 / 140

Technical information
7-16 DocuTech 61xx Operator Guide
Stacker
capacity Unfinished sheets:
3300 sheets, substance
16 (60 g/m2)
3000 sheets, substance
20 (75 g/m2)
2500 sheets, substance
24 (90 g/m2)
1875 sheets, substance
32 (120 g/m2)
1360 sheets, substance
110 (200 g/m2)
To allow a continuous run,
unload outer stack before
inner stack reaches capacity.
Type or
condition Xerographic bond paper in
good condition
Drilled paper
Slightly curled paper Do not use excessively curled
paper.
Transparencies must contain
some opaque sheets to avoid
finisher jams.
Stock not defined here is
included in the “Using various
stocks” section in this guide.
Table 7-14. Stitcher satisfaction guide
Stock
Reliable stacking may be
expected Less reliable stacking may
be expected
Suggested alternatives
Size 8 x 10 inches to 9 x 14
inches (203 x 254 mm to
229 x 356 mm) Use the top tray for larger
sizes
Weight Substance 16 to 110 (60 to
200 g/m2) Weights outside the limits
shown are not recommended.
Set size limit
due to copy
paper weight Collated: Up to 65 sheets
of substance 20 (75 g/m2)
or 0.28 inch (7 mm) thick
sets
Uncollated: 50 copies
maximum per stitch 0.28
inch (7 mm) thick sets
Collated: Up to 70 sheets of
substance 20 (75 g/m2) Reduce the paper weight to
enable stitching more sheets
per collated set.
Check the stitch quality.
Stacker
capacity Stacker capacity adjusts
automatically to suit
various set sizes To allow a continuous run,
unload outer stack before
inner stack reaches capacity.
Table 7-13. Stacker capacity
Stock
Reliable stacking may be
expected Less reliable stacking may
be expected
Suggested alternatives