Chapter 1 Introduction
2
Safety notes
Your DocuPrint XJ6C has been carefully designed to give
you years of safe, reliable performance. As with all
electrical equipment, however, there are a few basic
precautions you should take to avoid hurting yourself or
damaging the unit:
1.
Read and follow all warnings and instructions marked
on or supplied with the printer.
2.
Unplug the printer before you clean it. Use a damp
cloth only; do not use liquid or aerosol cleaners.
3.
Place you printer on a firm, solid surface. If you put it
on an unsteady surface, it might fall and become
damaged. If you place the printer on a soft surface,
such as a rug, sofa, or bed, the vents may be blocked,
causing it to overheat.
4.
Do not put the printer on or near a heat source, such
as a radiator or heat register. If you put the printer in
any kind of enclosure, make sure it is well ventilated.
5.
Do not use your printer near water, or spill liquid of
any kind into it.
6.
Be certain that your power source matches the rating
listed on the back of the printer. If you are not sure,
check with your dealer or with your local power
company.
7.
Be sure to install the printer near a power outlet that
will remain easily accessible.
8.
To avoid damaging the power cord, do not put
anything on it or place it where it will be walked on.
If the cord becomes damaged or frayed, replace it
immediately.
9.
The use of an extension cord or power strip with this
printer is not
recommended
. Check building codes
and insurance requirements before using an extension
cord or power strip. If you are using an extension
cord or power strip with the printer, make sure that
the total of the amperes required by all of the
