ADJUSTING PRINT QUALITY AND PERFORMANCE
6-2
XEROX DOCUPRINT 92C NPS TROUBLESHOOTING GUIDE
Example
Manually running a PQA
Measuring performance
You can use the DocuPrint sequencer log file to calculate print
performance. Although a stopwatch is the recommended method for
obtaining sustained throughput print speeds, the sequencer log can
be used to calculate speeds that include the start-up latency
associated with the printer. This section describes how to calculate
speeds using the sequencer log and how to minimize the start-up
latency in your calculations.
Note:
The sustained throughput using a stopwatch is a better
measurement of the speed of the job since the several seconds of
start-up time do not need to be measured.
Example
Refer to the following example when reading “Calculating
throughput.” The
Show Log
command in this example displays a
menu of logs with the current sequencer log named DocuPrint
sequencer:
Access level
Administrator or operator
Syntax
PQA
Arguments
None
PS–op>
pqa
DocuPrint manual PQA submitted as document number: (N)
Summary of Contents for DocuPrint 92C NPS
