Xerox DocuPrint 75 MX, User Manual

Page: 12 / 32

8
MICR User Guide
Selecting MICR fonts
Checking the font version
Selecting the wrong font can result in improper signal strength and
high reject rates at the bank. To make sure that you have the font
that you want, print a question mark, ?, in the MICR line. While
the resulting document does not have a valid MICR line, the
printed font is obvious. You can also print a test pattern. Refer to
“Printing MICR test forms,” for the procedure.
The test forms contain font version information: the font name,
revision character (if applicable), and the datastream type (PS,
PCL, LCDS).
The following table shows the version information that is displayed
on the test form for each font:
Table 1-2. Test Form Font Information
Font type
Datastream /
Type Resolution
Version
information
E13B
Type 1
PostScript Type 1 600 dpi E13B
609
PS
E13B
Type 3
PostScript Type 3 300 dpi E13B
4230
PS
E13B PCL 600 dpi E13B
609
PCL
E13B PCL 300 dpi E13B
REV.A
PCL
E13B
Landscape
LCDS 300 dpi E13B4L
REV
A
E13B
Portrait
LCDS 300 dpi E13B4P
REV
A