Maintenance
Operator Guide
2-4
DocuTech 65/DocuPrint 65
Power-off procedures
You can power off only the printer and allow the controller to keep on
processing jobs, or you can power off both the printer and the controller.
Printer power-off
When the printer power is off, the power-on/power-off indicator does not emit
light, it is colorless.
Under normal operating conditions the printer should be powered off using the
DocuSP Print Services on the controller, rather than by pressing the printer
on/off switch.
Printer power-off from the controller
You can power-off the printer from two different DocuSP Print Services menus
and still allow the controller to continue processing jobs.
Preferred Method
To power off the printer:
1. Display the System or the Printer menu.
2. Select the Printer Off option.
3. Confirm that the power-on/power-off indicator is colorless.
Printer Power-Off Using The Printer Switch
It is not obvious from the position of the switch whether the printer is on or off.
View the power-on/power-off indicator to determine the printer state: green for
on, colorless for off.
If you need to shut the printer down immediately, and this is an emergency,
use the red button described in the next section. If this is not an emergency,
use the procedure given below.
Alternate Method
To power-off the printer:
1. Locate the white on/off switch.
2. Press the switch to the left or front of the printer as shown in Figure 2-3.
3. Confirm that the power-on/power-off indicator is colorless.