Product overview
Operator Guide
1-12
DocuTech 65/DocuPrint 65
Stapling
Removing any of the output while the printer is running may produce finished
sets that are incorrectly stapled.
To ensure that the stapling of thin sets is satisfactory, the printer performs the
following actions.
Finishers before
the end of 1998
After 30 finished sets of 15 sheets, the printer:
1. cycles down
2. may raise a message to empty the Finisher (Stacker Tray)
3. waits briefly, whether the sets are removed or not
4. cycles up and resumes printing.
Finishers after the
end of 1998
After 30 finished sets of 15 sheets, the printer:
1. cycles down
2. raises a message to empty the Stacker
3. waits until the sets are removed
4. raises the Stacker Tray
5. cycles up and resumes printing.
If these parameters are not satisfactory for your printing, contact Xerox.