SYSGEN AND SYSGEN-RELATED PROCEDURES
Performing a mini sysgen
When to use
You can use the MINI command to make changes to the logical
configuration of the system, such as:
•
change the configuration options of the current system
•
deactivate or reactivate features and configuration options
that were installed as part of a previous full or update sysgen.
Note:
Make sure the logical configuration (the features
specified in the configuration options) and the physical
configuration (the hardware that supports those features) are the
same before performing a sysgen.
If you perform a sysgen and some device in the physical
configuration is missing from the logical configuration, that
device may be unusable after the sysgen is performed.
Mini sysgen procedure summary
1. Review the configuration options provided in the
“Configuration menu” section of the “Sysgen configuration
options” chapter.
2. Use the MINI command to display the Configuration Options
menu.
3. Select or specify your desired options.
Note:
If you are using a LINK terminal, do not use the
<BACKSPACE> key. If you use <BACKSPACE>, characters will
scroll across the screen and you will have to start the SYSGEN
process again.
4-30
XEROX 4635 LASER PRINTING SYSTEM—SYSTEM GENERATION GUIDE