SYSGEN CONFIGURATION OPTIONS
Additional sysgen parameters
In addition to the configuration options listed previously, you
may also need to supply the following information during the
system generation process.
Command
Description
Type of sysgen
Sysgen, auto sysgen, or mini sysgen can be performed by selecting
appropriate commands from the Sysgen Command menu (figure 2-1).
System ID
Each system can be assigned a name of up to 30 alphanumeric characters,
including spaces.
The ID displays in the following situations:
•
Whenever the system is booted
•
When a rollover and recovery occurs
•
In a rollover dump
•
Whenever a sysgen is performed
•
On listings produced by the Editor
•
On listings produced by the REPORT command to report billing
information.
Accounting file
You are asked if you want to save user accounting information.
Remember that if a currently existing accounting file is not saved, you
lose not only the accounting data but also the hierarchical data used to
structure the file.
Report accounting
You are asked if you want report accounting. This results in run statistics
being recorded for each report, as opposed to each job (which may
contain several reports).
After the sysgen completes, you may want to adjust the following
parameters to which the sysgen automatically assigns default values:
•
Maximum fonts per job (default 32)
•
Maximum forms per job (default 12)
•
Maximum number of active graphics in GVG memory (default 32)
•
Print file size (default of 425 cylinders is not determined by a sysgen).
Refer to the Xerox 4635 LPS Operations Reference for information on
modifying these values.
XEROX 4635 LASER PRINTING SYSTEM — SYSTEM GENERATION GUIDE
3-7