SYSGEN AND SYSGEN-RELATED PROCEDURES
Steps to perform an offline update sysgen using the SYSGEN command (continued)
Step
Action
System response
4.
Key in SYSGEN and press <ENTER>
* Sysgen program running *
System ID is: xxxxx
Do you want to enter a new system id? 'y' or 'n'
5.
Enter N and <ENTER> to allow the
sysgen to continue. Go to step 7.
6.
Enter Y and <ENTER> to allow the
previously entered ID to be changed.
Enter system ID of up to 30 characters
....*....*....*....*....*....*
Key in the new ID and press
>
<ENTER>.
System ID IS: xxxxx
Do you want to enter a new system id? 'y or 'n'
NOTE: When you enter no, sysgen
will continue. If you enter yes,
you will be able to change the
system ID again.
7.
Do you want to save the accounting file? enter 'y' or
'n'
Enter Y or N and press <ENTER>.
8.
The base configuration and the system configuration
options are displayed followed by:
Do you wish to make any changes? Enter 'y' or 'n'
Enter Y or N and <ENTER>. A Y
>
and <ENTER> response causes the
change menu to display. Each time a
change is made, the change question
is asked until an N and <ENTER> is
entered, and the sysgen program
continues.
9.
Do you want to discard the changes you just made? Enter
'y' or 'n''
To discard the changes you just
>
made and continue sysgen, enter Y.
To save the changes you just made
and continue sysgen, enter N.
Is continuation of sysgen required? (y or n)
Enter Y and <ENTER>.
Should sysgen read from host or tape? 'h' or 't'
4-18
XEROX 4635 LASER PRINTING SYSTEM—SYSTEM GENERATION GUIDE