SYSGEN AND SYSGEN-RELATED PROCEDURES
Steps to perform a full sysgen (continued)
Step
Action
System response
10.
Enter the system ID record of up to
30 characters and press <ENTER>
System ID IS: xxxxx
(the ID record that you just
entered.)
Do you want to enter a new system id? 'y' or 'n'
11.
Enter N and <ENTER>.
Initializing disk drive 0
Creating file
BITMAP
.$Y$ on drive 0
Creating file
MSBLK
.$Y$ on drive 0
Creating file
BADBLK
.$Y$ on drive 0
Creating file
CECYL
.$Y$ on drive 0
ENTER CMD ('C' FOR MENU)>
12.
Key in SYSGEN and press <ENTER>
* Sysgen program running *
System ID is: xxxxx
Do you want to enter a new system id? 'y' or 'n'
13.
Enter N and <ENTER> to allow the
sysgen to continue. Go to step 15.
14.
Enter Y and <ENTER> to allow the
previously entered ID to be changed.
Enter system ID of up to 30 characters
....*....*....*....*....*....*
Key in the new ID and press
>
<ENTER>.
System ID IS: xxxxx
Do you want to enter a new system id? 'y or 'n'
NOTE: When you enter N, sysgen
will continue. If you enter Y,
you will be able to change the
system ID again.
15.
Enter Ethernet Network Address
If configured,
enter the Ethernet
>
address provided by Xerox and press
<ENTER>.
16.
The base configuration and the system configuration
options are displayed followed by:
Do you wish to make any changes? Enter 'y' or 'n'
Enter Y or N and <ENTER>. A Y
>
and <ENTER> response causes the
change menu to display. Each time a
change is made, the change question
is asked until an N and <ENTER> is
entered, and the sysgen program
continues.
4-8
XEROX 4635 LASER PRINTING SYSTEM—SYSTEM GENERATION GUIDE