E n v i r o n m e n t a l S p e c i f i c a t i o n s
F-6
❖
D o c u P r i n t 4 5 0 8 U s e r G u i d e
FCC Compliance
Notice
This equipment has been tested and is in compliance with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Re-orient or relocate the receiving antenna.
•
Increase the distance between the equipment and the
receiver.
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for
help.
Shielded interface cables and I/O cords must be used for this
equipment to comply with the relevant FCC regulations.
Changes or modifications not expressly approved in writing by
Xerox may void the user’s authority to operate this equipment.
The Federal Communications Commission has developed a useful
booklet entitled, “How to Identify and Resolve Radio/TV
Interference Problems”. This booklet is available from the
Superintendent of Documents, U.S. Government Printing Office,
Washington, D.C. 20402, Stock No. 004-000-00345-4.
IC Compliance
Notice
This Class B digital apparatus meets all requirements of the
Canadian Interference–Causing Equipment Regulations of
ICES–003.
Cet appareil numérigue de la Classe B respecte toutes les exigences
du Réglement ICES–003 sur le Matériel brouilleur du Canada.
4508-apf.frm Page 6 Wednesday, May 22, 1996 8:38 AM
