Xerox DocuPrint 180, Product Manual

Page: 13 / 118

INTRODUCTION
XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE xiii
Document conventions
This guide uses the following conventions:
< > Angle brackets are used for keys on the system controller keyboard.
{ } Curly brackets are used for required characters.
... Ellipses indicate that you can repeat a parameter or list a series of
parameters.
[ ] Square brackets are used for optional command characters.
l Vertical bars are used to separate parameters in a series. The
vertical bar stands for “or.”
bold Bold is used for characters you enter at the command line.
italics Italics is used for variable information.
terminal font Terminal or monospace font is used to display system responses.
underline System default parameters are underlined.
UPPERCASE Uppercase letters are used for
command
names.
Note: You may key in entire words for each command or the first
three characters of each word. In this manual the entire word of each
command is spelled out.
Caution: Cautions alert you to an action that could damage
hardware or software.
!
Warning: Warnings alert you to conditions that may affect the
safety of people.