Xerox DocuPrint 180, Product Manual

Page: 59 / 118

PRODUCT DIFFERENCES/USER CONSIDERATIONS
XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE 5-5
Table 5-3. Will this 4650 (V3.5) job print on my DP 180 LPS?
Job features from 4650
(V3.5)
Results when run on DP 180 LPS)
Clusters Job prints. Operator needs to redefine
clusters if tray differs.
Edgemarking Job prints.
Fonts Job prints if the fonts and character sets
used are loaded on the DocuPrint 180
LPS or if sub-stitutions for these fonts
are defined.
Graphics Job prints if sufficient graphic memory is
available and input source is 300 dpi
resolution.
Labels Job prints using only paper-faced labels.
Refer to the
Xerox DP 180 LPS Operator
Guide for loading instructions.
Page density Job prints.
Paper sizes Job prints.
Paper stock Job prints if it does not use edge
reinforced 3-hole stock.
Stitch commands No stitcher available on DP 180 LPS,
therefore stitch commands are ignored
and job prints unstitched.
600 dpi input Job prints in 300 dpi. The 4650 LPS is
the only Xerox LPS that accepts 600 dpi
input.
300 dpi with interpolated
600 dpi output Job prints.