3-10
XEROX DFC165 & DWC165c Service Manual
3.1.6 Loading Paper
When adding paper to print received and copied documents, the following three
factors must be taken into consideration and
must always match
for the facsimile
machine to work properly:
-
paper size
, i.e. the width of the paper used
-
ASF tray width
, i.e. the distance between the inner sides of the ASF tray
-
printing format
, i.e. the setting of the FORMAT parameter in the PRINTER
PARAMETERS menu
1) Check that the ASF is set for the paper size you wish to use, i.e. that the
distance
between the inner sides
coincides with the
width of the paper
used. If it does
not, remove the cover of the ASF by gripping it at the centre of its lower edge,
position the two inner sides (using a screwdriver to release them at the bottom)
to fit the paper used (Fig. 3-12):
l
on the inner guides (1), for A4 format
l
on the outer guides (2), for LETTER and LEGAL formats
Fig. 3-12 Preparing the automatic sheet feeder
2) Reassemble the cover and insert the ASF in its housing, then tilt the cover forward
and load the paper of the desired size (max 70 sheets)(Fig. 3-13)
2 1
1 2
right inner side
left inner side
