Xerox Document Centre 706 Series, User Manual, Page: 79 / 269

63
4.3 Configuring the Printer Drivers
Installing/Configuring
the
Printer
Drivers
"
First Sheet
Enables you to select for the first sheet of your document, a paper source different from
the rest of the output sheets as selected in
Paper Source on the "Paper/Output" tab. Note
that the paper size used for this different paper source must be the same as the document.
Options include:
None
The first sheet will use the same paper source as the rest.
Different Paper Source
Specify the paper source for the first sheet:
• Auto (default)
• Tray 1
• Tray 2
(available only if Multi-Tray is not selected for Paper Source Options on the
"Printer" tab)
• Tray 2-1
• Tray 2-2
• Tray 2-3
(tray 2-1, tray 2-2, and tray 2-3 are available only if Multi-Tray is selected for
Paper Source Options on the "Printer" tab)
• Tray 3
• Tray 4
• Tray 5 (Bypass)
• Tray 6 (High Capacity)
EMF Spooling (for Windows NT 4.0/Windows 2000) (default: off)
Specifies the format in which to store printing information on your disk while a job is
waiting to be printed. Turning this control on will enable the EMF disk file format.
Otherwise, RAW format will be used. Enabled if
Vector is selected for Graphics Mode on
the "Graphics" tab.
Restore Defaults
Restore the settings in the dialog box to their default values.