Xerox Document Centre 706 Series, User Manual, Page: 204 / 269

188
Menu Item Description
Network Settings (con't...) • Agent: IPX Start Up
Defines the setting of the agent which uses IPX as a protocol of the transport
layer.
Available options: Off*, On.
Agent is necessary when using the CentreWare software with which you can
manage multiple printers from a distance. The printer information is controlled
by this agent and the CentreWare will collect the printer information from the
agent. When you use the CentreWare software in the NetWare environment,
activate the agent by IPX.
• Agent: UDP Start Up
Defines the setting of the agent which uses UDP as a protocol of the transport
layer.
Available options: Off, On*.
Agent is necessary when using the CentreWare software with which you can
manage multiple printers from a distance. The printer information is controlled
by this agent and the CentreWare will collect the printer information from the
agent.
If UDP is set to On when the IP address is not set, the IP address
setting screen will be displayed. Set the IP address using this
screen. At this point, if the IP address is not set using this screen,
Agent:
UDP Start Up will be forcibly set to Off .
• Agent: Community String
Specifies the community name for enabling the settings from the CentreWare
software to this machine.
Input no more than 12 characters from A-Z, 0-9 and space.
Community String will be displayed when Agent: IPX Start Up or
Agent: UDP Start Up is set to ON .
• IPX/SPX Setting
Sets the operation frame type of IPX/SPX or the type of TokenRing.
Options available depend on whether the Ethernet card or TokenRing card is
installed.
Available options when the Ethernet card is installed:
• AUTO* : Sets automatically the frame type.
• Ethernet II : Uses the Ethernet II specification frame type.
• Ethernet 802.3 : Uses the IEEE802.3/802.2 specification frame type.
• Ethernet 802.2 : Uses the IEEE802.2 specification frame type.
• Ethernet SNAP : Uses the IEEE802.3/802.2/SNAP specification frame type.
Available options when the TokenRing card is installed:
• Auto
• TokenRing
• TokenRing SNAP
IPX/SPX setting will be displayed when Agent: IPX Start Up ,
IPX/SPX of Transport or NetWare:Port Status of NetWare is set to On .
13.2 System/Meter Settings
* factory setting