manualshive.com logo in svg

Xerox Document Centre 706 Series, User Manual, Page: 206 / 269

Share
Download
Xerox Document Centre 706 Series User Manual Download Page 206

190

Menu Item

Description

Port Settings >

To be set when using the SMB port.

SMB

Items:
• Port Status

Define the setting of the SMB port when the power is on.

Available options: Disable, Enable*.

The note items at the end of this tabulation of print/mode settings.

• Transport Protocol

Define the setting of the transport protocols, TCP/IP and NetBEUI.

Available option for TCP/IP: On*, Off. Available option for NetBEUI: On*, Off.

• Print Mode

Sets the print mode.

Available option: Auto*, PCL, PostScript.

• PJL Switch

Sets the PJL commands sent from the host device to valid or invalid.

Available options: Off, On*.

• TBCP Filter

Define the setting of the TBCP Filter when the optional PostScript software kit

is installed.

Available options: Disable*, Enable.

Port Settings >

To be set when using the Netware port.

NetWare

Items:

• Port Status

Define the settings of the NetWare port when the power is on.

Available options: Disable*, Enable.

The note items at the end of this tabulation of print/mode settings.

• Transport Protocol

Define the setting of the transport protocols, TCP/IP and IPX/SPX.

Available option for TCP/IP: On, Off*. Available option for IPX/SPX: On*, Off.

• Print Mode

Sets the print mode.

Available option: Auto*, PCL, PostScript.

• PJL Switch

Sets the PJL commands sent from the host device to valid or invalid.

Available options: Off, On*.

• TBCP Filter

Define the setting of the TBCP Filter when the optional PostScript software kit

is installed.

Available options: Disable*, Enable.

Port Settings >

To be set when using the LPD port.

LPD

Items:

• Port Status

Define the settings of the LPD port when the power is on.

Available options: Disable, Enable*.

The note items at the end of this tabulation of print/mode settings.
If LPD is set to 

Enable 

when the IP Address is set to 

Specify Address

,

the IP Address setting screen will be displayed. Enter the IP Address
using the displayed screen.

13.2 System/Meter Settings

* factory setting

Summary of Contents for Document Centre 706 Series














































































































































































































































































Reviews:

No comments