Xerox DocuMate 3220, User Manual

Page: 183 / 221

Xerox
®
DocuMate
®
3220
User’s Guide
183
General
•
Lock settings
—this option prevents the user from making changes to the options in the scanner
interface. When the interface opens, only the scanning Presets will be available for a user to select
and use for scanning.
•
Default preset
—select the preset you want to have be the default displayed options in the scanner
interface each time it opens.
TWAIN Driver
•
Auto transfer
—scanning and transfer starts when the scanner detects paper.
•
Auto close on transfer
—the interface closes automatically when scanning is complete.
•
Force UI-less
—select this option to prevent this scanner interface from opening when you initiate a
scan in the scanning application. This option will only work if your scanning application supports
UI-less scanning. You may also need to select Auto close on transfer complete for this option to
work.
•
Preset overrides capabilities
—some scanning applications have the option to adjust the scan
settings and scan without opening this scanner interface. The next time this interface opens, the
last used settings will match the application settings that were used to scan. Select this option to
have the settings reset to the last ones used when this interface was open.
•
Enable user compression
—this option is enabled only if the scanner and the software allow manual
adjustment of the image compression.
•
Remember compression
—when a compression option is available for user adjustment, it cannot be
saved as part of a preset. Select this option to have the compression setting saved.
WIA Driver
•
Use default WIA UI
—select this option to display the Microsoft WIA interface instead of the
TWAIN interface in WIA 2.0 applications.
•
Emulate WIA 1.0
—select this option to display the TWAIN interface for WIA 1.0 compatible
applications. When this option is selected, WIA 2.0 applications will use the Microsoft WIA
interface.