background image

Scanning

26

DocuMate 272 Scanner User’s Guide

Scan from the One Touch Button Panel

You can scan from the One Touch Button Panel on the screen. 

1. Adjust the paper guide for the width of paper and load the 

documents with their tops into the Automatic Document 
Feeder.

For Simplex (one-sided) scans, load the documents 

face down

For Duplex (two-sided) scans, the documents can be face up or 
down because both sides are scanned.

2. Now click on the One Touch icon in the Windows Notification 

Area (at the bottom right corner of the screen).

The One Touch Button Panel opens and shows the first five on-
screen scanning buttons. Click the arrows to cycle through all 9 
settings.

3. On the screen—not on the scanner—click the button you want 

to use to scan.

The scanner begins scanning. When the process finishes, the 
scanned images appear in the Destination Application, just as if 
you scanned with the Simplex or Duplex scanner buttons.

The One Touch Icon.

NOTE:

The One Touch Properties window must be closed 

before you can scan from the Button Panel.

NOTE:

Your scanner comes with 9 factory-preset One Touch 

button settings. You can reconfigure and rename all the buttons.

Click these arrows 
to navigate through 
the 9 buttons.

Click the button you 
want to use to scan.

For example, if you want to scan 
with button 2, which converts the 
document to PDF, click here.

Or if you want to scan with button 4, which 
attaches the scanned document to a 
blank email message, click here.

Summary of Contents for DocuMate 272
































































































































Reviews: