Xerox DocuMate 272 Page 95 User Manual Download

Page: 95 / 127

Scanning with the TWAIN Interface from PaperPort

DocuMate 272 Scanner User’s Guide

1. Open the scanning software that you use for accessing the

TWAIN interface.

2. Set the resolution to 200 or 300 dpi to ensure good image

quality.

3. Choose

AutoCrop to original

to scan the proper size for the

card.

4. Choose

Duplex

to scan both sides of the card.

To scan a single side, uncheck

Duplex

5. Insert the card lengthwise into the Card Reader slot on the

back of the scanner.

6. If the AutoScan feature is turned on scanning begins.

7. If the AutoScan feature is not turned on click the

Scan

button.

The scanning starts and a progress box shows the image.

When scanning is finished, a thumbnail image of the scanned
card appears in the TWAIN application.

Summary of Contents for DocuMate 272
































































































































Search results

Summary of Contents for DocuMate 272

Reviews:

Related manuals for DocuMate 272

Brands by name

Popular brands

Xerox DocuMate 272, User Manual

Search results

Summary of Contents for DocuMate 272

Reviews:

Related manuals for DocuMate 272

Brands by name

Popular brands