5 Tools
112
T
ools
5
Paper Tray Priority
Set the paper tray priority sequence for automatic tray selection.
Automatic tray selection means that a tray containing the appropriate paper is automatically
selected by the machine for copying or printing.
You can select the Trays 1 to 3, and 6. This setting does not apply to Tray 5 (Bypass).
Paper Type Priority
Set the paper type priority sequence for automatic tray selection.
Automatic tray selection means that a tray containing the appropriate paper is automatically
selected by the machine for copying or printing.
You can set bond paper, plain paper, recycled paper, plain reload paper, heavyweight F,
gloss F, heavyweight FA, heavyweight FB, heavyweight FC, heavyweight FS, and custom
paper 1 to 5.
The paper type priority setting takes precedence over the paper tray priority settings.
If different paper types appear in the same priority sequence, the paper selection is
determined by paper tray priority sequence. Selecting [Auto Paper Off] for a paper type
prevents its paper tray from being used by automatic tray selection.
For information about the tray priority sequence, refer to "Paper Tray Priority" (P.112).
Tray 5 - Paper Size Defaults
Set the paper sizes shown in the [Tray 5] screen for [Paper Supply] when copying with the
Tray 5 (Bypass).
You can assign the paper size set here to the Tray 5 standard size button.
If you frequently use non-standard size paper for copying, assigning the paper size to a
button will save your time to specify the size each time. It is also convenient to set the
commonly used paper sizes toward the top.
A/B Series Size
You can select from sizes of A and B series.
Inch Size
You can select from sizes of inch series.
Others
You can select from other sizes.
Custom Size
You can enter any size. Set the width (X) within the range 98 to 483 mm, and the height (Y)
within the range 89 to 320 mm in 1 mm increments.
Auto Tray Switching Control
Set the method of auto tray switching when running out of paper loaded in the tray selected.
Auto Tray Switching
You can select from [Always Enable], [Enable during Auto Paper Select], or [Enable for Same
Paper Type/Color].
Targeted Paper Type (Copy Jobs)
You can select paper types.
When [According to Priority Assigned] is selected, the paper type is determined according to
the settings in [Paper Tray Priority] under the [Paper Tray Settings].
Targeted Paper Color (Copy Jobs)
You can target all paper colors or only one paper color.
Note
•
The machine does not switch the tray automatically in the following cases:
- The Tray 5 is selected.
- The tray containing paper other than plain paper, recycled paper, reload paper, or Custom1
to Custom 5 paper is selected.
- The tray containing paper that is set as [Auto Paper Off] in [Paper Type Priority] is selected.
